Author Topic:  YGE 120LV and Mini Vbar  (Read 887 times)

0 Members and 1 Guest are viewing this topic.

Offline rooster6

  • Full Member
  • ***
  • Posts: 206
  • Liked: 0
  • Likes Given: 0
YGE 120LV and Mini Vbar
« on: January 16, 2017, 09:46:34 PM »
Hi Guys,

I am wanting to run the internal Mini Vbar governor with my YGE 120LV in my Gobby 500.  Do I need a phase sensor or do I just connect the orange slave wire from the YGE to the RXA port on the Mini Vbar?  I just see some guys using a phase sensor with YGE's so I am a little confused.

Cheers,

Josh.

Offline Thunder Fighter

  • Administrator
  • Hero Member
  • *****
  • Posts: 6822
  • Liked: 52
  • Likes Given: 146
YGE 120LV and Mini Vbar
« Reply #1 on: January 16, 2017, 10:29:44 PM »
You need to make up the cable to get the phase output from the YGE if it is one of the later versions that have the phase sensor coming out the programming lead, you need to connect 2 of the outputs together along with getting the correct lead onto the right pin in the VBar.

//Dennis.
SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
Protos 380 Evo : MSH Mini Protos FBL - stretch
SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
CYE Stingray collective quad : and a handful of Blade Micros
MAAA Instructor Blades : Jeti DS-16
The arcSTAFF are here to help you.

arcHELI Rules | Search is your friend

Offline rooster6

  • Full Member
  • ***
  • Posts: 206
  • Liked: 0
  • Likes Given: 0
YGE 120LV and Mini Vbar
« Reply #2 on: January 23, 2017, 09:51:15 PM »
Thanks Dennis, I will research this some more.  Thanks again.

Josh.

Offline rooster6

  • Full Member
  • ***
  • Posts: 206
  • Liked: 0
  • Likes Given: 0
YGE 120LV and Mini Vbar
« Reply #3 on: January 23, 2017, 09:52:17 PM »
I made the lead and it works a treat.  Thanks Dennis.

Josh.
« Last Edit: January 23, 2017, 09:57:29 PM by rooster6 »