* Recent Posts

For Sale. Spedix S250 Pro Package Ready To Fly PRICE DROP by Bernoo
[August 15, 2018, 11:07:41 PM]


Castle Ice Lite 50 by no1smb
[August 13, 2018, 07:27:42 PM]


Scorpion 4025 550kv by ScottyDont
[August 12, 2018, 04:52:03 AM]


wanted x7 canopy by michaeljheli
[August 07, 2018, 12:41:46 PM]


Tincan Helifest August 3-7 2018 by Peter
[August 01, 2018, 01:15:22 PM]


Wanted by Dickie Knee
[July 29, 2018, 12:18:58 PM]


Futaba 18mz for sale by Scoobalimalima
[July 27, 2018, 09:33:33 AM]


Introduce (or re-introduce) yourself by WoodyB
[July 25, 2018, 07:05:20 AM]


WANTED AIRFRAME by Higham83
[July 24, 2018, 05:44:40 PM]


SOLD - Trex 700E Air Frame by djmaniac
[July 24, 2018, 05:14:30 PM]


Compass Exo with Minimal Flights. by savage600
[July 22, 2018, 01:15:13 PM]


Gaui X5 Fbl V1 with formula upgrades. by savage600
[July 22, 2018, 01:14:30 PM]


SOLD OS 91HZ-R 3C plus MP7 pile and bits by carbon99
[July 21, 2018, 08:03:35 PM]


Foam planes by savage600
[July 20, 2018, 01:22:13 PM]


SOLD Bavarian demon 3SX by Isaflash
[July 17, 2018, 06:29:31 PM]


SOLD QAV 250 FPV 5.8 with Tiger Motors, ECS's, Open Pilot Revo, cam, custom case by astr0b0y
[July 15, 2018, 08:50:11 PM]


SOLD by carbon99
[July 14, 2018, 10:05:17 AM]


Trex 500 by spoon1337
[July 12, 2018, 05:16:30 PM]


Wanted, SwitchGlo Pro Igniter by ChickenLips
[July 09, 2018, 07:38:08 AM]


SOLD - Immaculate Condition Jeti DS-16 by stevenjd
[July 08, 2018, 09:53:48 AM]


SOLD 5 x 6S 4400 LiPo 60C+ by astr0b0y
[July 07, 2018, 09:48:13 PM]


SOLD Vbar Black Pro by astr0b0y
[July 06, 2018, 06:45:09 PM]


SOLD Goblin 500 Complete by astr0b0y
[July 06, 2018, 02:46:01 PM]


SOLD Jeti DS-16 TX Mode 2 plus extras by astr0b0y
[July 06, 2018, 02:42:34 PM]


Talon 90 by Bjay415
[July 05, 2018, 07:43:07 PM]


Helis On The Clarence 2018 by Dickie Knee
[July 01, 2018, 09:29:48 PM]


Henseleit TDF build by Ozzy Mozzy
[July 01, 2018, 08:16:46 PM]


Hobbywing V4 - MSH Brain V2 Governor by Thunder Fighter
[June 27, 2018, 01:22:33 AM]


Wanted, a 600 sized Heli motor as per the ones mentioned or similar.I think Lol. by savage600
[June 26, 2018, 09:09:43 PM]


Castle Edge 100 by Bjay415
[June 22, 2018, 07:35:17 PM]


wondering by djmaniac
[June 19, 2018, 10:13:20 AM]


Cc Phoenix edge hv 80 by savage600
[June 18, 2018, 10:09:26 PM]


Mikado Logo 700 extreme carbon by Fredo
[June 18, 2018, 03:55:19 PM]


Spektrum AR7200BX - EDGE SE 710mm Blades - Prolux 12V Nitro Starter by Yorkie
[June 15, 2018, 05:22:00 PM]


Trex 600 E Pro by HeliRock
[June 11, 2018, 07:07:24 PM]


XL Power Specter 700 by Ozzy Mozzy
[May 26, 2018, 05:01:52 PM]


Compass hv6 parts by bell222
[May 23, 2018, 08:19:37 AM]


Piston Ring and Liner for OS 91 HZR 3d by Peter
[May 22, 2018, 12:26:55 PM]


JR Parts by Rotorvated
[May 18, 2018, 01:26:42 PM]


Vbar neo + sat + rescue/pro by jgern
[April 27, 2018, 07:53:43 PM]


Kontronik telemetry module for Mikado V-control by jgern
[April 27, 2018, 07:50:37 PM]


Kontronik Pyro 750-50L Competition by jgern
[April 27, 2018, 07:47:17 PM]


Trex 500 DFC Pro parts by Isaflash
[April 25, 2018, 12:00:50 PM]


iKON 2 / Brain V2 FBL - Latest update. by Thunder Fighter
[April 23, 2018, 08:44:17 PM]


ordering from scaleflying.com by 0z500
[April 23, 2018, 08:16:05 PM]


An Open Source Telemetry Script for the Taranis. by savage600
[April 18, 2018, 09:03:22 PM]


My H550 Hexacopter. by savage600
[April 18, 2018, 08:35:16 PM]


Photobucket images not working! We have a fix.... by Ozzy Mozzy
[April 17, 2018, 10:06:44 PM]


Plans for winter? by savage600
[April 15, 2018, 05:22:25 PM]


VBar Control Radio by muzz
[April 10, 2018, 10:12:02 PM]



Author Topic: Camera gimbal  (Read 1340 times)

0 Members and 1 Guest are viewing this topic.

Offline rofflcopter

  • Full Member
  • ***
  • Posts: 100
Camera gimbal
« on: July 18, 2014, 12:40:00 AM »
Hi all,

Just after some direction on choosing a brushless gopro gimbal. Is there a page that compares available products, pros and cons maybe.
Your input would Be invaluable too. Basically If I'm going to get general unwanted glitches or hassle that will effect the shot or quality of the mount noticeably notchy movement then im happy to pay more, really asking if there's any systems to avoid

Offline GypsyAu

  • Hero Member
  • *****
  • Posts: 719
Camera gimbal
« Reply #1 on: July 18, 2014, 01:08:26 AM »
Not sure about a comparison site/link but you could also try asking this in the FPVLAB
(hope this isn't against site rules, if so please delete)

Cheers
BEAM Heli\'s (E4-E6), JR & Devo Tx\'s, Asst. of Mini-Micro Heli\'s & Quads.
http://www.truelocal.com.au/business/gypsygoldau-1/maryborough

Offline flybar

  • Hero Member
  • *****
  • Posts: 697
Camera gimbal
« Reply #2 on: July 18, 2014, 09:11:25 AM »
I recently purchased a gimbal after doing some research. I had originally intended on going with the H3-3D but the price was very hefty. I found that the 2 next respectable units were the Feiyu G3 and the Tarot T-2D. They are all designed for the Hero 3.



I went with the G3 because it allows better access to the connections side of the GoPro.

I'm yet to set it up and test it.
T-Rex 700L Dominator | T-Rex 600EFL Pro | T-Rex 550E FBL | DJI 550 | DX9 | Phoenix Sim

Deet

  • Guest
Camera gimbal
« Reply #3 on: July 18, 2014, 10:32:58 AM »
What airframe are you attaching this to?

Offline flybar

  • Hero Member
  • *****
  • Posts: 697
Camera gimbal
« Reply #4 on: July 18, 2014, 11:11:45 AM »
Quote from: Deet;1596472
What airframe are you attaching this to?

A DJI F550 with AeroXcraft landing gear.
T-Rex 700L Dominator | T-Rex 600EFL Pro | T-Rex 550E FBL | DJI 550 | DX9 | Phoenix Sim

Deet

  • Guest
Camera gimbal
« Reply #5 on: July 18, 2014, 12:44:06 PM »
Quote from: flybar;1596473
A DJI F550 with AeroXcraft landing gear.

I meant the OP

Offline papafoster

  • Jr. Member
  • **
  • Posts: 83
Camera gimbal
« Reply #6 on: July 18, 2014, 08:10:38 PM »
Go for the Stella Gimbal from X Aircraft it only weighs 120grms and suits the Gopro a great gimbal for the price
:D If At First You Don\'t Succseed Fly Fly Again :D

Offline rofflcopter

  • Full Member
  • ***
  • Posts: 100
Camera gimbal
« Reply #7 on: July 18, 2014, 10:52:14 PM »
Intended to attach on a dji450, may plan on building 500 or 550 with dihedral arms

Offline papafoster

  • Jr. Member
  • **
  • Posts: 83
Camera gimbal
« Reply #8 on: July 19, 2014, 08:05:43 PM »
I am running the Stella with GOPRO Hero 3 black on a Tarot IronMan 650 Quad with AX-4008Q 620kv pancakes, Castle Creations 35amp muli rotor esc, APC 14x4.5 multi rotor props, Dji Naza V2 flight controller, Dji 5.8ghz fpv with osd, all running on 14.8 volts 12800mah Gens Ace Lipo's. This set up give's me a 30 min flight time with room to spare, I am using a Spektrum DX9 radio with full telemetry on top of all tha,t the whole quad weights in at 2.8kgs 1.3kg being the lipo's.

Allan
:D If At First You Don\'t Succseed Fly Fly Again :D

Offline rofflcopter

  • Full Member
  • ***
  • Posts: 100
Camera gimbal
« Reply #9 on: July 21, 2014, 01:00:43 AM »
How much was the ironman 650 setup allan?

Sent from my GT-I9305T using Tapatalk

Offline papafoster

  • Jr. Member
  • **
  • Posts: 83
Camera gimbal
« Reply #10 on: July 21, 2014, 08:43:07 PM »
The setup is around $1500 without the Gopro camera
:D If At First You Don\'t Succseed Fly Fly Again :D

Offline rofflcopter

  • Full Member
  • ***
  • Posts: 100
Camera gimbal
« Reply #11 on: July 23, 2014, 12:45:45 PM »
Thanks for your replies everyone, I wasnt aware of the Stella gimbal before this past but I like it a lot now and also may have a change of frame choice now too

Sent from my GT-I9305T using Tapatalk