* Recent Posts

SOLD by Bernoo
[August 15, 2018, 11:07:41 PM]


Castle Ice Lite 50 by no1smb
[August 13, 2018, 07:27:42 PM]


Scorpion 4025 550kv by ScottyDont
[August 12, 2018, 04:52:03 AM]


wanted x7 canopy by michaeljheli
[August 07, 2018, 12:41:46 PM]


Tincan Helifest August 3-7 2018 by Peter
[August 01, 2018, 01:15:22 PM]


Wanted by Dickie Knee
[July 29, 2018, 12:18:58 PM]


Futaba 18mz for sale by Scoobalimalima
[July 27, 2018, 09:33:33 AM]


Introduce (or re-introduce) yourself by WoodyB
[July 25, 2018, 07:05:20 AM]


WANTED AIRFRAME by Higham83
[July 24, 2018, 05:44:40 PM]


SOLD - Trex 700E Air Frame by djmaniac
[July 24, 2018, 05:14:30 PM]


Compass Exo with Minimal Flights. by savage600
[July 22, 2018, 01:15:13 PM]


Gaui X5 Fbl V1 with formula upgrades. by savage600
[July 22, 2018, 01:14:30 PM]


SOLD OS 91HZ-R 3C plus MP7 pile and bits by carbon99
[July 21, 2018, 08:03:35 PM]


Foam planes by savage600
[July 20, 2018, 01:22:13 PM]


SOLD Bavarian demon 3SX by Isaflash
[July 17, 2018, 06:29:31 PM]


SOLD QAV 250 FPV 5.8 with Tiger Motors, ECS's, Open Pilot Revo, cam, custom case by astr0b0y
[July 15, 2018, 08:50:11 PM]


SOLD by carbon99
[July 14, 2018, 10:05:17 AM]


Trex 500 by spoon1337
[July 12, 2018, 05:16:30 PM]


Wanted, SwitchGlo Pro Igniter by ChickenLips
[July 09, 2018, 07:38:08 AM]


SOLD - Immaculate Condition Jeti DS-16 by stevenjd
[July 08, 2018, 09:53:48 AM]


SOLD 5 x 6S 4400 LiPo 60C+ by astr0b0y
[July 07, 2018, 09:48:13 PM]


SOLD Vbar Black Pro by astr0b0y
[July 06, 2018, 06:45:09 PM]


SOLD Goblin 500 Complete by astr0b0y
[July 06, 2018, 02:46:01 PM]


SOLD Jeti DS-16 TX Mode 2 plus extras by astr0b0y
[July 06, 2018, 02:42:34 PM]


Talon 90 by Bjay415
[July 05, 2018, 07:43:07 PM]


Helis On The Clarence 2018 by Dickie Knee
[July 01, 2018, 09:29:48 PM]


Henseleit TDF build by Ozzy Mozzy
[July 01, 2018, 08:16:46 PM]


Hobbywing V4 - MSH Brain V2 Governor by Thunder Fighter
[June 27, 2018, 01:22:33 AM]


Wanted, a 600 sized Heli motor as per the ones mentioned or similar.I think Lol. by savage600
[June 26, 2018, 09:09:43 PM]


Castle Edge 100 by Bjay415
[June 22, 2018, 07:35:17 PM]


wondering by djmaniac
[June 19, 2018, 10:13:20 AM]


Cc Phoenix edge hv 80 by savage600
[June 18, 2018, 10:09:26 PM]


Mikado Logo 700 extreme carbon by Fredo
[June 18, 2018, 03:55:19 PM]


Spektrum AR7200BX - EDGE SE 710mm Blades - Prolux 12V Nitro Starter by Yorkie
[June 15, 2018, 05:22:00 PM]


Trex 600 E Pro by HeliRock
[June 11, 2018, 07:07:24 PM]


XL Power Specter 700 by Ozzy Mozzy
[May 26, 2018, 05:01:52 PM]


Compass hv6 parts by bell222
[May 23, 2018, 08:19:37 AM]


Piston Ring and Liner for OS 91 HZR 3d by Peter
[May 22, 2018, 12:26:55 PM]


JR Parts by Rotorvated
[May 18, 2018, 01:26:42 PM]


Vbar neo + sat + rescue/pro by jgern
[April 27, 2018, 07:53:43 PM]


Kontronik telemetry module for Mikado V-control by jgern
[April 27, 2018, 07:50:37 PM]


Kontronik Pyro 750-50L Competition by jgern
[April 27, 2018, 07:47:17 PM]


Trex 500 DFC Pro parts by Isaflash
[April 25, 2018, 12:00:50 PM]


iKON 2 / Brain V2 FBL - Latest update. by Thunder Fighter
[April 23, 2018, 08:44:17 PM]


ordering from scaleflying.com by 0z500
[April 23, 2018, 08:16:05 PM]


An Open Source Telemetry Script for the Taranis. by savage600
[April 18, 2018, 09:03:22 PM]


My H550 Hexacopter. by savage600
[April 18, 2018, 08:35:16 PM]


Photobucket images not working! We have a fix.... by Ozzy Mozzy
[April 17, 2018, 10:06:44 PM]


Plans for winter? by savage600
[April 15, 2018, 05:22:25 PM]


VBar Control Radio by muzz
[April 10, 2018, 10:12:02 PM]



Author Topic: iKON 2 / Brain V2 FBL - Latest update.  (Read 590 times)

0 Members and 1 Guest are viewing this topic.

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 82
  • Location: Western Australia
  • Club: KAMS
iKON 2 / Brain V2 FBL - Latest update.
« on: April 22, 2018, 01:29:27 PM »
Hi all

Have any iKON / Brain FBL users had any issues with the latest firmware (3.2) update?

My Brain V2 HD updated (automatically, as it does when you connect it to the software) two days ago when I went to make some slight changes to the governor settings.  Now my swash servos bump intermittently and my throttle servo twitches.  And, I have also lost the full integration with my Jeti TX.

I have since tested another one of my Brain V2 HD units that hasn't been updated, and that one continues to work flawlessly with full Jeti integration.  This is why I suspect the new update has screwed things up.
Has anyone else experienced similar issues with the latest update?

I have sent an email to iKON support for answers.

In the meantime, does anyone know how to reload an older version of the firmware?

Cheers
Piers
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  Compass eXo  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Admiral

  • Jr. Member
  • **
  • Posts: 64
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #1 on: April 22, 2018, 03:09:03 PM »
I had issues, I plugged into the computer to do some adjustment and was to the firmware was out of date and an upgrade was needed etc.
The configurator updated OK then the system started on the iKon unit, download,Writing & Verification had just finish when the  USB drivers reloaded, this locked everything up completely the iKon was only accessible through the I/O port after that, not from the USB or the Transmitter was not talking to it.

After fiddling around with BT and resetting to factory default no joy, so I contacted HeliDirect iKon support, after enabling the Bootloader and re loading the firmware I got it working, I still don't trust it though when connected to the configuator it looses contact every now and then for a few seconds, I'm not going to use that unit again until I run it through it's paces in a clunker.

I have updated another iKon unit with no issues since, which I'll be using in my Agile.
Keith        Keep those rotors spinning !

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 82
  • Location: Western Australia
  • Club: KAMS
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #2 on: April 22, 2018, 03:34:01 PM »
Thanks Admiral,

I have heard of people going through the reload procedure in the bootloader.  How does one get into the bootloader to start with?

Cheers
Piers
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  Compass eXo  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Admiral

  • Jr. Member
  • **
  • Posts: 64
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #3 on: April 22, 2018, 04:24:58 PM »
short 2 center pins in the SYS/IO port and power it to let it enter Bootloader mode. Then please plug it into the PC and start to re-flash the firmware again. ( iKon Supports instructions)
Keith        Keep those rotors spinning !

Offline Thunder Fighter

  • Administrator
  • Hero Member
  • *****
  • Posts: 6824
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #4 on: April 23, 2018, 08:54:26 AM »
For the Jeti integration support did you update the file on the Tx as well? You will need to download and update it manually after updating the unit.

//Dennis.
SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
Protos 380 Evo : MSH Mini Protos FBL - stretch
SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
CYE Stingray collective quad : and a handful of Blade Micros
MAAA Instructor Blades : Jeti DS-16
The arcSTAFF are here to help you.

arcHELI Rules | Search is your friend

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 82
  • Location: Western Australia
  • Club: KAMS
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #5 on: April 23, 2018, 09:13:19 AM »
Thanks Dennis, didn't know about that.  I will update the Jeti file as well and see how it goes.  Could one assume if I don't update the other Brain V2 HD to the current version, the new Jeti integration file will not work with the older firmware version on the Brain.  Only one way to find out, I suppose.

Cheers
Piers
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  Compass eXo  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 82
  • Location: Western Australia
  • Club: KAMS
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #6 on: April 23, 2018, 12:39:17 PM »
For the Jeti integration support did you update the file on the Tx as well? You will need to download and update it manually after updating the unit.

//Dennis.
Just tried it Dennis, it shows up under "Device Explorer" and when you select "Brain" (has a tick to the right as well) it thinks about it for a couple of seconds then quickly flashes up "Device Disconnected", the tick changes to a cross momentarily then goes back to a tick.  The Jeti does not go into the FBL configuration area.

I'm running the latest firmware on the Jeti DS16, LUA version.

Cheers
Piers
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  Compass eXo  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Thunder Fighter

  • Administrator
  • Hero Member
  • *****
  • Posts: 6824
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #7 on: April 23, 2018, 02:11:46 PM »
But did you install the new config file for Jeti from the 3.2.000 version of the Brain? I think you will find it on the MSH site.

//Dennis.
SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
Protos 380 Evo : MSH Mini Protos FBL - stretch
SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
CYE Stingray collective quad : and a handful of Blade Micros
MAAA Instructor Blades : Jeti DS-16
The arcSTAFF are here to help you.

arcHELI Rules | Search is your friend

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 82
  • Location: Western Australia
  • Club: KAMS
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #8 on: April 23, 2018, 06:00:44 PM »
Thanks Dennis,

Yep did all that, after a full day of investigation, it is the Jeti model file that is corrupt.  So co-incidental with the updating of the FBL.  I created another model in the TX and it picks up the integration with the FBL unit.

I didn't realise that Jeti firmware 4.27 is out on the street, I was running 4.23 and I usually get my firmware updates from espritmodel.com, they're still running 4.23 as the latest version.

Latest Jeti firmware here: http://www.jetimodel.com/en/Downloads/DC-DS-Firmware-Update-Version-4-27/

Now I have to setup the model again as the saved file is also corrupted.  Ho hum :rolleyes:

Cheers
Piers

PS.  I'll fire model up in the coming days to see if the swash servos still bump, but I'm hoping it is all related.  :thumbsup:
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  Compass eXo  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Thunder Fighter

  • Administrator
  • Hero Member
  • *****
  • Posts: 6824
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #9 on: April 23, 2018, 08:44:17 PM »
Damn, thats unlucky. I haven't updated to 4.27 yet or to the new Brain firmware, probably will be a little while as I don't want to risk having to re-do anything at the moment with a lot of heli things on and not much down time in-between.

//Dennis.
SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
Protos 380 Evo : MSH Mini Protos FBL - stretch
SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
CYE Stingray collective quad : and a handful of Blade Micros
MAAA Instructor Blades : Jeti DS-16
The arcSTAFF are here to help you.

arcHELI Rules | Search is your friend