arcHELI V8 Blackhawk

  • January 23, 2018, 10:42:44 AM
  • Welcome, Guest
Advanced search  

Pages: [1]   Go Down

Author Topic:  YGE 120LV and Mini Vbar  (Read 815 times)

0 Members and 1 Guest are viewing this topic.

rooster6

  • Full Member
  • ***
  • Offline Offline
  • Posts: 206
YGE 120LV and Mini Vbar
« on: January 16, 2017, 09:46:34 PM »

Hi Guys,

I am wanting to run the internal Mini Vbar governor with my YGE 120LV in my Gobby 500.  Do I need a phase sensor or do I just connect the orange slave wire from the YGE to the RXA port on the Mini Vbar?  I just see some guys using a phase sensor with YGE's so I am a little confused.

Cheers,

Josh.
Logged

    Thunder Fighter

    • Administrator
    • Hero Member
    • *****
    • Online Online
    • Posts: 6808
    • Liked: 43
    • Likes Given: 136
    YGE 120LV and Mini Vbar
    « Reply #1 on: January 16, 2017, 10:29:44 PM »

    You need to make up the cable to get the phase output from the YGE if it is one of the later versions that have the phase sensor coming out the programming lead, you need to connect 2 of the outputs together along with getting the correct lead onto the right pin in the VBar.

    //Dennis.
    Logged
      SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
      Protos 380 Evo : MSH Mini Protos FBL - stretch
      SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
      CYE Stingray collective quad : and a handful of Blade Micros
      MAAA Instructor Blades : Jeti DS-16
      The arcSTAFF are here to help you.

      arcHELI Rules | Search is your friend

      rooster6

      • Full Member
      • ***
      • Offline Offline
      • Posts: 206
      YGE 120LV and Mini Vbar
      « Reply #2 on: January 23, 2017, 09:51:15 PM »

      Thanks Dennis, I will research this some more.  Thanks again.

      Josh.
      Logged

        rooster6

        • Full Member
        • ***
        • Offline Offline
        • Posts: 206
        YGE 120LV and Mini Vbar
        « Reply #3 on: January 23, 2017, 09:52:17 PM »

        I made the lead and it works a treat.  Thanks Dennis.

        Josh.
        « Last Edit: January 23, 2017, 09:57:29 PM by rooster6 »
        Logged
          Pages: [1]   Go Up