* Recent Posts

For Sale OS 91HZ-R 3C plus MP7 pile and bits by carbon99
[July 18, 2018, 07:00:18 PM]


SOLD Bavarian demon 3SX by Isaflash
[July 17, 2018, 06:29:31 PM]


Tincan Helifest August 3-7 2018 by Helinutter
[July 16, 2018, 08:30:36 AM]


SOLD QAV 250 FPV 5.8 with Tiger Motors, ECS's, Open Pilot Revo, cam, custom case by astr0b0y
[July 15, 2018, 08:50:11 PM]


SOLD by carbon99
[July 14, 2018, 10:05:17 AM]


Trex 500 by spoon1337
[July 12, 2018, 05:16:30 PM]


Wanted, SwitchGlo Pro Igniter by ChickenLips
[July 09, 2018, 07:38:08 AM]


Gaui X5 Fbl V1 with formula upgrades. by savage600
[July 08, 2018, 01:28:51 PM]


Compass Exo with Minimal Flights. by savage600
[July 08, 2018, 01:16:49 PM]


SOLD - Immaculate Condition Jeti DS-16 by stevenjd
[July 08, 2018, 09:53:48 AM]


SOLD 5 x 6S 4400 LiPo 60C+ by astr0b0y
[July 07, 2018, 09:48:13 PM]


SOLD Vbar Black Pro by astr0b0y
[July 06, 2018, 06:45:09 PM]


SOLD Goblin 500 Complete by astr0b0y
[July 06, 2018, 02:46:01 PM]


SOLD Jeti DS-16 TX Mode 2 plus extras by astr0b0y
[July 06, 2018, 02:42:34 PM]


Talon 90 by Bjay415
[July 05, 2018, 07:43:07 PM]


Helis On The Clarence 2018 by Dickie Knee
[July 01, 2018, 09:29:48 PM]


Henseleit TDF build by Ozzy Mozzy
[July 01, 2018, 08:16:46 PM]


Hobbywing V4 - MSH Brain V2 Governor by Thunder Fighter
[June 27, 2018, 01:22:33 AM]


Wanted, a 600 sized Heli motor as per the ones mentioned or similar.I think Lol. by savage600
[June 26, 2018, 09:09:43 PM]


Trex 700E Air Frame by Bjay415
[June 22, 2018, 07:44:35 PM]


Castle Ice Lite 50 by Bjay415
[June 22, 2018, 07:39:00 PM]


Castle Edge 100 by Bjay415
[June 22, 2018, 07:35:17 PM]


wondering by djmaniac
[June 19, 2018, 10:13:20 AM]


Cc Phoenix edge hv 80 by savage600
[June 18, 2018, 10:09:26 PM]


Mikado Logo 700 extreme carbon by Fredo
[June 18, 2018, 03:55:19 PM]


Spektrum AR7200BX - EDGE SE 710mm Blades - Prolux 12V Nitro Starter by Yorkie
[June 15, 2018, 05:22:00 PM]


Trex 600 E Pro by HeliRock
[June 11, 2018, 07:07:24 PM]


XL Power Specter 700 by Ozzy Mozzy
[May 26, 2018, 05:01:52 PM]


Compass hv6 parts by bell222
[May 23, 2018, 08:19:37 AM]


Piston Ring and Liner for OS 91 HZR 3d by Peter
[May 22, 2018, 12:26:55 PM]


JR Parts by Rotorvated
[May 18, 2018, 01:26:42 PM]


Vbar neo + sat + rescue/pro by jgern
[April 27, 2018, 07:53:43 PM]


Kontronik telemetry module for Mikado V-control by jgern
[April 27, 2018, 07:50:37 PM]


Kontronik Pyro 750-50L Competition by jgern
[April 27, 2018, 07:47:17 PM]


Trex 500 DFC Pro parts by Isaflash
[April 25, 2018, 12:00:50 PM]


iKON 2 / Brain V2 FBL - Latest update. by Thunder Fighter
[April 23, 2018, 08:44:17 PM]


ordering from scaleflying.com by 0z500
[April 23, 2018, 08:16:05 PM]


Introduce (or re-introduce) yourself by sneekypete
[April 23, 2018, 07:37:06 AM]


An Open Source Telemetry Script for the Taranis. by savage600
[April 18, 2018, 09:03:22 PM]


My H550 Hexacopter. by savage600
[April 18, 2018, 08:35:16 PM]


Photobucket images not working! We have a fix.... by Ozzy Mozzy
[April 17, 2018, 10:06:44 PM]


Plans for winter? by savage600
[April 15, 2018, 05:22:25 PM]


VBar Control Radio by muzz
[April 10, 2018, 10:12:02 PM]


Collective dead around center by sneekypete
[April 10, 2018, 01:01:43 PM]


Freestyle Flyers Lounge- Laying the Smack ! by Thunder Fighter
[April 10, 2018, 07:01:54 AM]


arcHELI New Direction by muzz
[April 09, 2018, 07:28:39 PM]


Compass Chronos by JakeSutho
[April 09, 2018, 08:52:23 AM]


Single Blade listing by dansmyth
[April 06, 2018, 04:50:18 PM]


MRCHC SCALE HELI AND GENERAL FUNFLY by helitone
[April 02, 2018, 12:44:48 PM]


Compass Exo by savage600
[April 01, 2018, 08:10:06 PM]



Author Topic: outrage whos still flying them are you going to continue?  (Read 4215 times)

0 Members and 1 Guest are viewing this topic.

Offline Invogue123

  • Sr. Member
  • ****
  • Posts: 419
outrage whos still flying them are you going to continue?
« Reply #15 on: December 31, 2014, 08:20:55 AM »
Let me the size of the bearing and I will see if I have something?


Sent from my iPhone using Tapatalk
Thunder Tiger

Offline HoffY

  • Hero Member
  • *****
  • Posts: 675
outrage whos still flying them are you going to continue?
« Reply #16 on: December 31, 2014, 10:53:23 AM »
The Fusion 50 it is. I mentioned it a few posts up.  i've managed to get one side of the shield off but unfort. its the opposite side of where the glue entered and i can't seem to free the bearing race.  Still trying to free up the other side "C" clip (and then shield removal).  I'm goingi to try and force it soon and see how i go. Once i break the initial glued affect i may be right.  Failing that.. i'll possibly run it glued for now and just let it atually rotate within the inner bearing race.  Such a small thing but so annoying!  Its the "Ball Bearing Flanged" 5 ID x 10 OD x 4 that goes into the frames, Part No. R90N407.


EDIT:  ok i think the crisis has been averted! Managed to free up the bearings and race.  Its not perfect but it does mostly roll smoothly.  I'll just put the best part  mid-way as the shaft that goes through doesnt do full turns anyway so i should be right for now! I'll just keep a close eye on it and try and find a bearing to replace it with.   :)
« Last Edit: December 31, 2014, 11:40:47 AM by HoffY »

Offline nige69

  • Hero Member
  • *****
  • Posts: 1659
    • http://www.intertech.net.au/dnn/
  • Location: Canberra
  • Club: Namagi SFC
outrage whos still flying them are you going to continue?
« Reply #17 on: December 31, 2014, 01:04:58 PM »
Hoffy, try some drops of acetone into the bearing.  this should dissolve the CA and keep working the bearing adding more acetone as required.  flush out with metho once done and re-lube the bearing.
Nigel
----------------
Velocity 50N2, Gaui NX7, JR-XG14
My Web Site: http://www.intertech.net.au/dnn/

Offline HoffY

  • Hero Member
  • *****
  • Posts: 675
outrage whos still flying them are you going to continue?
« Reply #18 on: December 31, 2014, 09:17:20 PM »
hi nige69,  yup. i tried to make do. unfort. i only had metho on hand but with a bit of elbow grase and plenty of time, i managed to free it up enough to do for now. Should work ok as at the end of the day its only a beaering thats going to have a cycle of 45-50 degrees so its not super critical (thankfully).    I will try some acetone with this 406 adhesive and see how that goes for future reference! cheers

Offline Rotorvated

  • Hero Member
  • *****
  • Posts: 584
outrage whos still flying them are you going to continue?
« Reply #19 on: March 23, 2015, 12:54:49 AM »
Still flying my Fusion50. On the bench ATM as I had a mishap at 400ft. Still got enough bits to keep it running for a fair while. Got my old flybar version as well if I need to rob parts.

Love the way they fly and the overall quality of design. Got a fleet of Goblins too so they are copping a flogging while the Fusion is in the shop.
:p Fusion50\'s, Goblin700\'s, Goblin 500, BEAM, Skookum, [G]Many Planks[/G]:rolleyes:

Offline flys3D

  • Hero Member
  • *****
  • Posts: 846
outrage whos still flying them are you going to continue?
« Reply #20 on: March 24, 2015, 10:13:30 PM »
They fly great but the supply of parts make them painful to own, my fusion has been raped of its electronics and is collecting dust.

Offline CaptainS

  • Sr. Member
  • ****
  • Posts: 462
    • http://www.mudgeerabamowers.com
outrage whos still flying them are you going to continue?
« Reply #21 on: March 24, 2015, 10:21:35 PM »
Still got love for my Velocity 90n.


sent from my Lumia 1320Win10 phone
using Tapatalk.
A few.... Some on the wall, some in boxes.

Offline hijakdgtr

  • Full Member
  • ***
  • Posts: 212
outrage whos still flying them are you going to continue?
« Reply #22 on: April 13, 2015, 01:19:31 PM »
I still got my 12s fusion 50 with spares and a complete spare unbuilt kit,not sure what Iam gonna do at this stage... Parts are rare as people are saying

Offline rex09

  • Hero Member
  • *****
  • Posts: 818
outrage whos still flying them are you going to continue?
« Reply #23 on: October 06, 2015, 06:23:55 PM »
Nearly a year after the first post, so who still has their F50 still flying?
Mines done another 600+ flights since this thread started, still going well (touch wood) I put a set of new bearing in the motor, head & swash, plus had to raid the NIB tail rotor as the old one was worn out.
Long live the Fusions
Trex 450 Pro V2 Ar7200BX :smirk::smirk:
Fusion 50,  many thanks from Brooknet @ Coff\'s 2011 :p
Trex 500ESP in a MD500 Defender 5 blades :whistle:
Goblin 500 Red Carbon :smirk:

Offline bradshaw

  • Sr. Member
  • ****
  • Posts: 304
outrage whos still flying them are you going to continue?
« Reply #24 on: October 06, 2015, 06:30:58 PM »
Awesome! Captians is a shelf queen atm just needs some tlc, maybe sone new dampners and its good to go!

Sent from my SM-N9005 using Tapatalk
:rockon::yoda: GAUI NX7 :smirk:... Align 800 Trekker :chopper:

Offline Outrage us

  • Sr. Member
  • ****
  • Posts: 261
outrage whos still flying them are you going to continue?
« Reply #25 on: October 06, 2015, 07:34:41 PM »
Yeah  much to my sons disgust the velocity 50 is still going strong and maintenance free so far . Just fuel and fly . Maybe I'll give it new bearings for xmas.😊
:worship:Raptor G4 :worship:Outrage Velocity 50:chopper:Raptor 50 Titan SE:onya: Koala A119 Titan 50 mech:wigglie:Huey UH1-Y:wigglie:

Offline nige69

  • Hero Member
  • *****
  • Posts: 1659
    • http://www.intertech.net.au/dnn/
  • Location: Canberra
  • Club: Namagi SFC
outrage whos still flying them are you going to continue?
« Reply #26 on: October 06, 2015, 07:57:51 PM »
Im still flying my Velocity 50 and 90.  My son loves it when I let him fly the 50 as it has so much power compared to his old Compass Knight with "past-it" batteries.
Nigel
----------------
Velocity 50N2, Gaui NX7, JR-XG14
My Web Site: http://www.intertech.net.au/dnn/

Offline HoffY

  • Hero Member
  • *****
  • Posts: 675
outrage whos still flying them are you going to continue?
« Reply #27 on: October 06, 2015, 11:09:02 PM »
I still fly a Fusion 50.  I only got around to building it in mid December 2014-Jan 2015.  unfort the wind is crazy lately combined with not having the time i rarely get a fly at all and my skills are actually going backwards because of this (welcome to the last 4 years!).  But the Fusion rocks and i haven't stoved it yet so she's still a go!

PIC1
PIC2

Offline Wayne B

  • Hero Member
  • *****
  • Posts: 3256
outrage whos still flying them are you going to continue?
« Reply #28 on: October 07, 2015, 01:42:43 PM »
Funnily enough still have my Fusion 50 and Vel 90, the Vel 90 has a never released boom assembly block and new Alloy tail assembly. I need to reassemble them after moving to the sunny coast.

Offline bradshaw

  • Sr. Member
  • ****
  • Posts: 304
outrage whos still flying them are you going to continue?
« Reply #29 on: October 07, 2015, 02:00:42 PM »
Quote from: Wayne B;1614231
Funnily enough still have my Fusion 50 and Vel 90, the Vel 90 has a never released boom assembly block and new Alloy tail assembly. I need to reassemble them after moving to the sunny coast.
Loved the v2 full alloy tail assembly totally changed the heli for the better!
Quote from: HoffY;1614220
I still fly a Fusion 50.  I only got around to building it in mid December 2014-Jan 2015.  unfort the wind is crazy lately combined with not having the time i rarely get a fly at all and my skills are actually going backwards because of this (welcome to the last 4 years!).  But the Fusion rocks and i haven't stoved it yet so she's still a go!

PIC1
PIC2


Sent from my SM-N9005 using Tapatalk
:rockon::yoda: GAUI NX7 :smirk:... Align 800 Trekker :chopper: