* Recent Posts

Trex 700E Air Frame by Bjay415
[June 22, 2018, 07:44:35 PM]


Castle Ice Lite 50 by Bjay415
[June 22, 2018, 07:39:00 PM]


Castle Edge 100 by Bjay415
[June 22, 2018, 07:35:17 PM]


Talon 90 by Bjay415
[June 22, 2018, 07:31:51 PM]


wondering by djmaniac
[June 19, 2018, 10:13:20 AM]


Cc Phoenix edge hv 80 by savage600
[June 18, 2018, 10:09:26 PM]


Mikado Logo 700 extreme carbon by Fredo
[June 18, 2018, 03:55:19 PM]


Spektrum AR7200BX - EDGE SE 710mm Blades - Prolux 12V Nitro Starter by Yorkie
[June 15, 2018, 05:22:00 PM]


Trex 600 E Pro by HeliRock
[June 11, 2018, 07:07:24 PM]


XL Power Specter 700 by Ozzy Mozzy
[May 26, 2018, 05:01:52 PM]


Compass hv6 parts by bell222
[May 23, 2018, 08:19:37 AM]


Piston Ring and Liner for OS 91 HZR 3d by Peter
[May 22, 2018, 12:26:55 PM]


JR Parts by Rotorvated
[May 18, 2018, 01:26:42 PM]


Vbar neo + sat + rescue/pro by jgern
[April 27, 2018, 07:53:43 PM]


Kontronik telemetry module for Mikado V-control by jgern
[April 27, 2018, 07:50:37 PM]


Kontronik Pyro 750-50L Competition by jgern
[April 27, 2018, 07:47:17 PM]


Trex 500 DFC Pro parts by Isaflash
[April 25, 2018, 12:00:50 PM]


iKON 2 / Brain V2 FBL - Latest update. by Thunder Fighter
[April 23, 2018, 08:44:17 PM]


ordering from scaleflying.com by 0z500
[April 23, 2018, 08:16:05 PM]


Introduce (or re-introduce) yourself by sneekypete
[April 23, 2018, 07:37:06 AM]


Gaui X5 fbl by savage600
[April 22, 2018, 04:19:06 PM]


An Open Source Telemetry Script for the Taranis. by savage600
[April 18, 2018, 09:03:22 PM]


My H550 Hexacopter. by savage600
[April 18, 2018, 08:35:16 PM]


Photobucket images not working! We have a fix.... by Ozzy Mozzy
[April 17, 2018, 10:06:44 PM]


Plans for winter? by savage600
[April 15, 2018, 05:22:25 PM]


VBar Control Radio by muzz
[April 10, 2018, 10:12:02 PM]


Collective dead around center by sneekypete
[April 10, 2018, 01:01:43 PM]


Freestyle Flyers Lounge- Laying the Smack ! by Thunder Fighter
[April 10, 2018, 07:01:54 AM]


arcHELI New Direction by muzz
[April 09, 2018, 07:28:39 PM]


Compass Chronos by JakeSutho
[April 09, 2018, 08:52:23 AM]


Single Blade listing by dansmyth
[April 06, 2018, 04:50:18 PM]


Immaculate Condition Jeti DS-16 by Kris
[April 05, 2018, 08:34:49 PM]


MRCHC SCALE HELI AND GENERAL FUNFLY by helitone
[April 02, 2018, 12:44:48 PM]


Compass Exo by savage600
[April 01, 2018, 08:10:06 PM]


New Henseleit TDS by marcust
[March 31, 2018, 05:07:03 PM]


Some FPV racing stuff by taz
[March 30, 2018, 12:01:16 AM]


Tailboom Cover Carbon fiber - Logo 550 SX neon red by marco
[March 29, 2018, 04:25:26 PM]


trex-500 Fuselage by Agusta
[March 29, 2018, 12:03:22 AM]


here we go ............ again !!!!!!!! by Thunder Fighter
[March 28, 2018, 06:52:51 AM]


Raptor 50 V2 parts by shung1
[March 26, 2018, 04:44:15 PM]


2 x DS-7001 HV BK Servos by shung1
[March 25, 2018, 12:51:44 PM]


Skookum SK540 FBL by Bungraman
[March 24, 2018, 07:36:34 PM]


Futaba GY401 by muzz
[March 23, 2018, 06:44:42 AM]


Henseleit TDF by Ozzy Mozzy
[March 22, 2018, 07:12:58 AM]


Raptor g4 nitro by stuie
[March 17, 2018, 03:03:15 PM]


Kontronik Kosmik 200 and Kontronik Fan ** BRAND NEW IN BOX ** by wizza
[March 15, 2018, 09:05:13 PM]


Kontronik Jive Pro 80+ HV by Webby2506
[March 15, 2018, 03:11:40 PM]


Scorpion Tribunus 120LV w/BEC by Ozzy Mozzy
[March 13, 2018, 08:05:04 PM]


REBELS Fun Fly 4-6 May 2018 by Grubscrew
[March 12, 2018, 02:50:26 PM]


New Diabolo from miniCopter by Higham83
[March 11, 2018, 07:25:32 AM]



Author Topic: iKON 2 / Brain V2 FBL - Latest update.  (Read 363 times)

0 Members and 1 Guest are viewing this topic.

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 81
  • Location: Western Australia
  • Club: KAMS
iKON 2 / Brain V2 FBL - Latest update.
« on: April 22, 2018, 01:29:27 PM »
Hi all

Have any iKON / Brain FBL users had any issues with the latest firmware (3.2) update?

My Brain V2 HD updated (automatically, as it does when you connect it to the software) two days ago when I went to make some slight changes to the governor settings.  Now my swash servos bump intermittently and my throttle servo twitches.  And, I have also lost the full integration with my Jeti TX.

I have since tested another one of my Brain V2 HD units that hasn't been updated, and that one continues to work flawlessly with full Jeti integration.  This is why I suspect the new update has screwed things up.
Has anyone else experienced similar issues with the latest update?

I have sent an email to iKON support for answers.

In the meantime, does anyone know how to reload an older version of the firmware?

Cheers
Piers
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Admiral

  • Jr. Member
  • **
  • Posts: 64
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #1 on: April 22, 2018, 03:09:03 PM »
I had issues, I plugged into the computer to do some adjustment and was to the firmware was out of date and an upgrade was needed etc.
The configurator updated OK then the system started on the iKon unit, download,Writing & Verification had just finish when the  USB drivers reloaded, this locked everything up completely the iKon was only accessible through the I/O port after that, not from the USB or the Transmitter was not talking to it.

After fiddling around with BT and resetting to factory default no joy, so I contacted HeliDirect iKon support, after enabling the Bootloader and re loading the firmware I got it working, I still don't trust it though when connected to the configuator it looses contact every now and then for a few seconds, I'm not going to use that unit again until I run it through it's paces in a clunker.

I have updated another iKon unit with no issues since, which I'll be using in my Agile.
Keith        Keep those rotors spinning !

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 81
  • Location: Western Australia
  • Club: KAMS
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #2 on: April 22, 2018, 03:34:01 PM »
Thanks Admiral,

I have heard of people going through the reload procedure in the bootloader.  How does one get into the bootloader to start with?

Cheers
Piers
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Admiral

  • Jr. Member
  • **
  • Posts: 64
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #3 on: April 22, 2018, 04:24:58 PM »
short 2 center pins in the SYS/IO port and power it to let it enter Bootloader mode. Then please plug it into the PC and start to re-flash the firmware again. ( iKon Supports instructions)
Keith        Keep those rotors spinning !

Offline Thunder Fighter

  • Administrator
  • Hero Member
  • *****
  • Posts: 6822
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #4 on: April 23, 2018, 08:54:26 AM »
For the Jeti integration support did you update the file on the Tx as well? You will need to download and update it manually after updating the unit.

//Dennis.
SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
Protos 380 Evo : MSH Mini Protos FBL - stretch
SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
CYE Stingray collective quad : and a handful of Blade Micros
MAAA Instructor Blades : Jeti DS-16
The arcSTAFF are here to help you.

arcHELI Rules | Search is your friend

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 81
  • Location: Western Australia
  • Club: KAMS
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #5 on: April 23, 2018, 09:13:19 AM »
Thanks Dennis, didn't know about that.  I will update the Jeti file as well and see how it goes.  Could one assume if I don't update the other Brain V2 HD to the current version, the new Jeti integration file will not work with the older firmware version on the Brain.  Only one way to find out, I suppose.

Cheers
Piers
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 81
  • Location: Western Australia
  • Club: KAMS
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #6 on: April 23, 2018, 12:39:17 PM »
For the Jeti integration support did you update the file on the Tx as well? You will need to download and update it manually after updating the unit.

//Dennis.
Just tried it Dennis, it shows up under "Device Explorer" and when you select "Brain" (has a tick to the right as well) it thinks about it for a couple of seconds then quickly flashes up "Device Disconnected", the tick changes to a cross momentarily then goes back to a tick.  The Jeti does not go into the FBL configuration area.

I'm running the latest firmware on the Jeti DS16, LUA version.

Cheers
Piers
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Thunder Fighter

  • Administrator
  • Hero Member
  • *****
  • Posts: 6822
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #7 on: April 23, 2018, 02:11:46 PM »
But did you install the new config file for Jeti from the 3.2.000 version of the Brain? I think you will find it on the MSH site.

//Dennis.
SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
Protos 380 Evo : MSH Mini Protos FBL - stretch
SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
CYE Stingray collective quad : and a handful of Blade Micros
MAAA Instructor Blades : Jeti DS-16
The arcSTAFF are here to help you.

arcHELI Rules | Search is your friend

Offline Bungraman

  • Jr. Member
  • **
  • Posts: 81
  • Location: Western Australia
  • Club: KAMS
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #8 on: April 23, 2018, 06:00:44 PM »
Thanks Dennis,

Yep did all that, after a full day of investigation, it is the Jeti model file that is corrupt.  So co-incidental with the updating of the FBL.  I created another model in the TX and it picks up the integration with the FBL unit.

I didn't realise that Jeti firmware 4.27 is out on the street, I was running 4.23 and I usually get my firmware updates from espritmodel.com, they're still running 4.23 as the latest version.

Latest Jeti firmware here: http://www.jetimodel.com/en/Downloads/DC-DS-Firmware-Update-Version-4-27/

Now I have to setup the model again as the saved file is also corrupted.  Ho hum :rolleyes:

Cheers
Piers

PS.  I'll fire model up in the coming days to see if the swash servos still bump, but I'm hoping it is all related.  :thumbsup:
KDS AGILE 7.2 Elect & Gas /  Marvelcraft Bell 412  /  MSH Protos 500  /  COMPASS Warp 360  /  Blade 180CFX

Offline Thunder Fighter

  • Administrator
  • Hero Member
  • *****
  • Posts: 6822
Re: iKON 2 / Brain V2 FBL - Latest update.
« Reply #9 on: April 23, 2018, 08:44:17 PM »
Damn, thats unlucky. I haven't updated to 4.27 yet or to the new Brain firmware, probably will be a little while as I don't want to risk having to re-do anything at the moment with a lot of heli things on and not much down time in-between.

//Dennis.
SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
Protos 380 Evo : MSH Mini Protos FBL - stretch
SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
CYE Stingray collective quad : and a handful of Blade Micros
MAAA Instructor Blades : Jeti DS-16
The arcSTAFF are here to help you.

arcHELI Rules | Search is your friend